Gasket Maker

silicone gasket maker is one-part, non-slumping,can make almost any gasket instantly, so it can replace most cut gaskets. It forms to any shape instantly and cures fast. After curing, it resists cracking, shrinking and migration caused by thermal cycling. Also, it can work up to 280º C and of good resistance of oil, water, anti-freeze and transmission fluid,weather, vibration and grease Main Feature 1,Make Any Gasket Instantly2,For All Vehicles3,Low Volatile4,Valve Covers5,Intake Manifold6,Oil Pump Flanger7,Transmission8,Water Pump User's Guide: 1. Clean all surfaces thoroughly. Remove old gaskets and prepare flange surfaces. Dry and remove all oil and grease; 2. Remove the cap, puncture inner seal of the tube, screw on nozzle and cut the nozzle to desired size; 3. Apply continuous, uniform 1 6mm bead around perimeter of one surface. Completely surround all bolt holes; 4. Wait about 10 minutes for silicone to skin over. Then reassemble the parts. 5. Silicone dries to touch in 1 hour and allow 24 hours to fully cure and bond. Packing:85gm alum tube, 12pcs/box, 12box/carton Carton Size: 52x 26x43cm Notes: A) Leave thickness for gasket when reassembling. Don't over-tighten the bolts. B) Sealant releases acetic acid (vinegar-like odor). Use with adequate ventilation. C) Replace the cap after us